Learn the installation skills of bathroom hardware pendants!

Bathroom hardware pendants generally refer to metal products installed on the walls of bathrooms and bathrooms for placing or hanging items such as cleaning supplies, towels and clothes, which usually include clothes hooks, cup holders, towel holders, tissue holder, soap ashtrays, racks, etc. They are small but practical important components in bathrooms. So how do you install these fragmentary and tiny pendants? Do-it-yourself installation is there anything to pay attention to? Next, I will introduce the installation skills of bathroom hardware pendants for everyone ~

01.Installation steps of bathroom hardware pendant

1. Determine the installation position of the pendant and mark it down. In order to achieve the best effect, it is best to avoid installing on the wall column.

2. After determining the installation point, mark the position of the screw hole corresponding to the installation of the pendant base on the installation pad.

3. Punch holes at the marked points of the screw holes, and the diameter of the holes should be slightly larger than the diameter of the screws, leaving a little space for easy installation.

4. Insert the plastic expansion tube into the drilling hole, and then tighten the fixed base with endless screws.

5. Put the pendant on the base and tighten the screw to fix the pendant.

02.Installation position of bathroom hardware pendant

1. Bathtowel rack: mainly installed outside the bathtub, about 1.8 meters above the ground. Bath towels are placed on the upper layer, and towels can be hung on the lower tube.

2. Double-pole towel rack: it can be installed on the empty wall in the center of the bathroom. When installed alone, it is about 1.5 meters from the ground.

3. Single-pole towel rack: it can be installed on the empty wall in the center of the bathroom. About 1.5 meters above the ground.

4. Single cup holder and double cup holder: generally installed on the walls on both sides of the washbasin, in line with the makeup holder. Mostly used for placing toothbrushes and toothpaste.

5. Soap ashtray: mostly installed on the walls on both sides of the washbasin, in line with the dressing table. Can be combined with a single cup holder or a double cup holder. Soap nets can also be installed on the inner wall of the bathroom to facilitate bathing. Soap ashtrays are mostly installed on the side near the toilet, which is convenient for dusting ash.

6. Shelf (cosmetic shelf): installed above the washbasin and below the cosmetic mirror. The height from the washbasin should be 30 cm.

7. Clothes hook: it can be installed on the wall outside the bathroom, and the height from the ground should be 1.7 meters. Used to hang clothes when bathing, and can also be used by combining a plurality of clothes hooks.

. tissue holder: It is installed at the side of the toilet, where it is easy to reach by hand and not obvious. Generally, 60 cm from the ground is appropriate.

03.Precautions for installation of bathroom hardware pendants

Hardware installation usually involves drilling holes in the tiles after the tiles are laid, then embedding wooden wedges into the holes, and then fixing the hardware pendants with screws or expansion screws. It is suggested that a professional master should use a glass drill to drill holes in the tiles first, and then use an impact drill to hit the cement to avoid cracking the tiles.